DDMC802 - 8 x 2A Multipurpose Controller

• 230V ±14% 50/60Hz Single Phase at 16A
• 8 x outputs at 2A, dimmed, switched or HF Ballast (module dependant)
• DIN Rail enclosure (12 unit)
• Will accept 8 x output modules, which are plug in for ease of service
• Available output modules include:
- DDLM102 1 x 2A leading edge phase control module, suitable for incandescent lamps and some types of dimmable electronic transformers
- DDLM104 1 x 4A leading edge phase control module, suitable for incandescent lamps and some types of dimmable electronic transformers
- DDTM102 1 x 2A trailing edge phase control module, suitable for use with most types of dimmable electronic transformers
- DDBM100 1 channel ballast module, suitable for controlling DALI (Broadcast mode only), DSI & 1-10V ballasts and transformers (a relay module must be paired with a HF ballast module when controlling 1-10V ballasts)
- DDRM104 1 x 4A relay module, suitable for switched loads
- DDCM102 1 channel x 2A SPDT curtain control module
- DDFM102 1 channel x 400VA fan control module
• 1 x RS485 DyNet serial port
• Channel status indicators and override switches
• Dimensions H 86mm x W 210mm x D 68mm
• Packed weight 0.9kg

DTE310 - 3 x 10A Trailing Edge Dimmer

• 230V ±14% 50/60Hz Single Phase at 30A or 3-Phase Y 10A per phase
• 3 dimmed outputs (trailing edge phase control) at 10A. Total device load 30A
• Each output protected by a 10A MCB
• Regulating device - IGBT 1200V, 57A nom., 200A surge
• Fall time > 200µS @ 230V
• 8 multipurpose programmable dry contact 0-5V/0-10V DC analogue inputs 
• Dimensions H 450mm x W 225mm x D 75mm
• Packed weight 3.5kg

DTE1210 - 12 x 10A Trailing Edge Dimmer

• 230V ±14% 50/60Hz 3-Phase Y at 120A
• 12 dimmed outputs (trailing edge phase control) at 10A. Total device load 120A
• Each output protected by a 10A MCB
• Regulating device - Dual MOSFET's 600V, 47A nom., 141A surge
• Fall time > 200µS @ 230V
• Dimensions H 610mm x W 290mm x D 190mm
• Packed weight 16.7kg