Products - Integration Devices

Networking devices and products to assist in integration to other systems.

	DIR-TX8 - Infra-red Transmitter • 12V DC 50mA, supplied from DyNet network • 8 independent, individually controllable outputs • 4 x 3.5mm stereo jack connector, accepts stereo & mono plugs • 1 x IR input, used for learning & saving unknown IR codes • 1 x RS485 DyNet port • 1 x AUX programmable dry contact input • Programmable logic controller • Dimensions: H 30mm x W 80mm x D 150mm • Packed weight 0.15kg • DIR-EM2 supplied separately Your browser does not support inline frames or is currently configured not to display inline frames.
	DDMIDC8 - Dry Contact/Voltage Input Interface • 8 x Opto Isolated inputs, each configurable to Dry Contact or 0-24V AC/DC inputs • 4 x 0-10V DC analogue non-isolated inputs • LED status indicators for each opto isolated input • Programmable logic controller • Powered from the DyNet network • RS485 DyNet port • DIN Rail enclosure, 6 units wide • Can be mounted on DIN rail, also has provision for screw fixing to a wall without the use of DIN rail • Dimensions H 86mm x W 105mm x D 58mm • Packed weight 0.324kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DDNG485 - Network Gateway • Powered from the network, no mains supply required • 2 x RS485 DyNet serial ports • Optical Isolation between ports • Programmable message filtering • Programmable logic controller • DIN Rail enclosure, 6 units wide • Can be mounted on DIN rail, also has provision for screw fixing to a wall without the use of DIN rail • Dimensions H 86mm x W 105mm x D 58mm • Packed weight 0.324kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DNG485 - Network Gateway • 230V 50/60Hz single phase at <0.1A • 2 x RS485 DyNet serial ports • 3.75KV RMS Optical Isolation between ports • Packet filtering • DyNet to DyNet II translation • Programmable logic controller • DMX512 Receive: 64 channels • DMX512 Transmit: 64 channels • Dimensions H 320mm x W 225mm x D 75mm • Packed weight 3.1kg Your browser does not support inline frames or is currently configured not to display inline frames.

	DDNI-LON - DyNet to LON Interface • DyNet to LON interface • 1 x RS485 DyNet Serial Port • 1 x TP/FTT10A twisted pair LONWorks port • Supports 63 SNVTs • Dimensions: H 86mm x W 105mm x D 70mm • Packed weight 0.6kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DNG232 - RS232 Gateway • DyNet to RS232 Gateway • 1 x RS485 DyNet serial port • 1 x RS232 serial port • RS232 port can be programmed to transmit custom data • Pre programmed "Plain English" text interpreter mode • Pre programmed Remote Access Modem mode • RS232 Baud rate: 600 - 460800 • RS232 Max packet length: 254 bytes • Dimensions: H 30mm x W 80mm x D 150mm • Packed weight 0.15kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DTK502 - Dry Contact Inputs • Designed to fit into third party devices to allow operation on a DyNet network. • 4 dry contact inputs • Powered from the DyNet network • Small enough to fit into 3rd party PIR motion sensors • Firmware supports special "motion detector" mode • 1 x RS485 DyNet serial port • Dimensions H 19mm x W 45mm x D 19mm • Weight 15.5 grams Your browser does not support inline frames or is currently configured not to display inline frames.
	DTK932V7 - Network Bridge • 230V single phase & neutral supply at 0.25A • 2 x RS485 serial ports, supports DyNet & DMX512 TX • Optical Isolation between ports • Programmable message filtering • Programmable logic controller • DMX512 Transmit - 512 Channels • Memory: 8Kb EEPROM, 512Kb DRAM, 1024Kb FLASH • Dimensions H 320mm x W 225mm x D 70mm • Packed weight 3.1kg Your browser does not support inline frames or is currently configured not to display inline frames.